🔒 Marketplace réservée aux professionnels, merci de vous identifier pour consulter les prix et commander.
DIMM
DIMM
Marketplace Pro
🚚
Mode public, catalogue ouvert, sans prix. Chaque produit est une page indexable (SEO).
2 BRASS FITTINGS FOR DN 40 METERS - NUT THREAD 2" (50/60) SOCKET THREAD R 1"1/2 (40/49) - ref. DHRAC-40, Clack
Clack

2 BRASS FITTINGS FOR DN 40 METERS - NUT THREAD 2" (50/60) SOCKET THREAD R 1"1/2 (40/49) - ref. DHRAC-40

Part number ART070803 · Vessel filtration

Net prices excl. VAT and ordering are reserved for signed-in professional accounts.

Presentation

This set of 2 brass fittings is used to install a DN 40 water meter. One fitting is mounted on the inlet, the other on the outlet. They connect the meter to the pipework, and the meter remains removable for replacement, calibration or maintenance.

Threads

  • Nut: female thread 2" (50/60), meter side
  • Socket: male conical thread R 1" 1/2 (40/49), network side

The R thread is a conical thread (BSPT): sealing is achieved on the thread, using an appropriate sealing product (PTFE tape, hemp and paste, or resin).

Installation

The sockets are screwed onto the pipework or isolation valves. The nuts then tighten the meter, with a flat gasket between each nut and the meter body. Observe the flow direction indicated by the arrow on the meter. Sufficient straight length must be provided upstream and downstream to ensure measurement accuracy.

Use

These fittings are used for mounting DN 40 meters on the water inlet of a building or site, on the supply to a water softener or volumetric regeneration filter, or on a high-flow metering circuit. Brass ensures good mechanical strength and long service life in cold water.

Compatibility

These fittings are suitable for DN 40 meters with a body threaded 2". The DIMM team will help you verify compatibility with your meter.

Vessel filtration

Panier pro

Mon compteL'eau purement et simplement
Jacques
Propulsé par Claude · Jacques peut se tromper, vérifiez les informations importantes.